Rooms of the Home

Build some clever plywood clamp extenders to use when bar clamps are too short to do the job. It beats...

Here's a tip for making lithium tool batteries last twice as long. Most kits come with two batteries. Take one...

A jointer is the best tool for flattening twisted, warped boards. But what if you don't have a jointer or...

Don’t have a power sander to sand curvy rough-sawn edges? You do if you own a 3/8-in. drill. Taper the end...

Save a “used”sanding-belt to make specialized sanding tools. All you need is the belt, a pair of scissors and a little...

Years ago, my son asked for help on an arithmetic story problem: “A 16-ft. long board is sawn into four...

Build your dream shed with easy access, storage galore and a private porch for lounging. Here's how to do it:

Transform scrap pieces of PVC pipe into storage sites for dowels and fasteners, courtesy of “tipfull” reader Al Miller. 

Build this mobile tool chest and take all your tools to the job in just one trip!

Here’s an outfeed roller that you can adjust in seconds to support boards coming off stationary power tools of every...

If you’ve ever cut an octagonal piece for a project, you probably “snuck up on it.” You drew the shape,...

If your miter saw isn’t cutting square, the problem is easy to fix. Unplug the saw, loosen the fence bolts,...

Subway tiles are a great way to give a bathroom a brand new look. Here's our step-by-step guide to...

We finally got the hang of preserving partially used caulk tubes from resourceful reader Stephen Hoke.

Here’s a method that’ll give you great results and keep the lid aligned perfectly as you cut each side.

Bending sheet metal and flashing into crisp angles is easy with this two-board bending tool. To build one, you need...

This jig holds your belt sander upside down for sanding of handheld project parts. Each sander has a different shape,...

This simple miter saw table has some great advantages and takes less than an hour to make.

We’ve used this great tip in our shop for years because you can cut plywood as accurately with a circular...

Saw tight corners with less binding by lightly rounding over the back edges of the blade.

When you’re shortening a bolt or threaded rod with a hacksaw, you always mangle the threads at the sawn end,...

Store just about every hand tool you need on a strip of vinyl-coated 1/2-in. wire mesh hardware cloth. Make a...

Here’s a classic jig for cutting angled parts on your table saw. Build it from two 30-in. long x 2-1/2...

Every good workshop (even if it's just a sliver of your garage) needs a quality workbench with ample storage. Begin...

Give your paper towels a brake! Cut a 6-in.-wide section from the rounded side of a 1-gallon bleach bottle, then...

It doesn't take long for a home office to become cluttered, here are 10 easy DIYs to make your home...

Save yourself from numerous problems at home by memorizing these hacks.

Family Handyman reader Christopher Rings sent us photos and drawings of his incredible workbench. We just might need to build...

The kitchen is often the epicenter of the home therefore it's easy for it to become cluttered. Try these interesting...